What thickness is 20 gauge 5052-H32 aluminum on this page?
This page uses 0.032 in / 0.813 mm as the nominal 20 gauge thickness for aluminum sheet.
Sheet metal
20 Gauge 5052-H32 aluminum Bend Calculator
Prefilled bend allowance, deduction, and radius reference values for 20 gauge 5052-H32 aluminum at 0.032 in / 0.813 mm nominal thickness.
5052-H32 aluminum20 ga0.032 in0.813 mm
Static reference
Common thickness, radius, and angle combinations
| Gauge | Thickness | Inside radius | Angle | Bend allowance | Bend deduction |
|---|---|---|---|---|---|
| 20 ga | 0.032 in / 0.813 mm | 0.032 in / 0.813 mm | 45 deg | 0.0347 in | 0.0183 in |
| 16 ga | 0.0508 in / 1.29 mm | 0.0762 in / 1.935 mm | 90 deg | 0.150 in | 0.104 in |
| 12 ga | 0.0808 in / 2.052 mm | 0.0808 in / 2.052 mm | 120 deg | 0.2335 in | 0.3263 in |
Interactive calculator
20 Gauge 5052-H32 aluminum Bend Calculator
Bend allowance0.0694 in
Neutral axis radius0.0442 in
FAQ
Specific checks for this calculator
Can these 5052-H32 aluminum bend values be used directly for production?
Use them as starting estimates only. Test bends and supplier data are needed for final bend deduction, springback, tooling, and safe tonnage.